We have accumulated many different molds for parts of many different sports cars over the years. We may have what you need on the shelf or we can custom make it for you. Here are some of our pre-made products. These can be bought as-is or can be adapted to fit your specific needs. We have an especially nice selection of wings for Porsches and Ferraris. We have adapted these wing profiles to many other makes of cars as well.
|
 |
| Carbon Fiber Repair Kit |
|
| Carbon Fiber Repair Kit This kit includes everything needed for minor track side repairs. Upon request, we can provide different materials such as Kevlar or fiberglass. Kit includes 750 ml of resin in a convenient 2:1 mixing ratio, 20 Mixing cups, 20 mixing sticks, 10 pairs of gloves, 1 pair of scissors, 2 squeegees for spreading resin onto carbon, 1 piece of professional grade 40 grit sandpaper, 1 yard of carbon cloth (aerospace grade), and 250 ml of acetone for clean up. Also includes complete instructions for basic repairs.
Price: $ 175
|
 |
| Porsche carbon headlight cover |
|
| Carbon headlight cover This will protect your Porsche's valuable headlight lens from damage on the track, or to completely cover an empty headlight bucket to save weight.
|
 |
| Carbon RSR wing upright |
|
|
Carbon wing upright for RSR Porsches This wing upright is less than half the weight of the aluminum Porche units, very durable, and can be customized for any car/wing combination. This photo provides only an example of what we currently offer.
|
 |
| 360 GT Splitter |
|
| 360GT Splitter
This is an exact duplicate of the original 360GT splitter. However we construct ours to be much more durable with only a slight weight penalty. Leading edges are heavily reinforced to withstand rock and track debris damage. The underside leading edges and rear corners are also reinforced to withstand grinding from track contact. We also service all splitters from any car. We can repair, reinforce or replace any splitter you may currently have on any car.
|
 |
| 360 Carbon Shifter Paddles |
|
|
Paddle Shifters These paddles are an original Stealth Composites design. We developed them for Ferrari of Washington in 2002 when they pursued and won the Grand Am GT championship and duplicated the feat in 2003. They used these paddles exclusively after the first practice with them. They allow the driver to make shifts regardless of hand position and help to lower lap times. After 5 years, Ferrari chose to copy our design for the F430 GT; quite a compliment. However, the Ferrari oversized paddles are made from aluminum, not carbon fiber, and are heavier and weaker. Our paddles are 100% carbon, will not bend, break or warp, and will fit any 360 or 430, including all street cars and racecars.
|
 |
| 355 wing installed |
|
 |
| 355 wing |
|
| 355 Challenge Wing
An exact reproduction of the Ferrari 355 Challenge wing. This wing is available with the original style curved end plates or the much more aerodynamic straight end plates. It is made with aerospace grade carbon and epoxy which will hold up much better and is lighter than the original wings. The original Ferrari wings, made with polyester resin, are heavy, very susceptible to damage, and are now failing on many cars due to engine heat, sun and aging. We also make the wing available with a removable gurney slot which allows gurney changes to be made in a few seconds and looks very professional.
|
 |
| 360 GT wing |
|
|
360 GT Wing
An exact reproduction of the Ferrari 360GT wing. It's available with the original style end plates or custom sized ones of your choice. The wing is made with aerospace grade carbon and epoxy which makes it light and durable. This is a high down force design which will generate around 1000 lbs of down force at 180 mph. The wing has a great profile and we have adapted it to be mounted on Porsches and many other custom racecars, including the 2005 Le Mans GT winner from British American Motorsports (BAM!). We also make the wing available with a removable gurney slot.
|
 |
| removable gurney slot |
|
|
Gurney Any of our wing profiles can be offered with a slot for a removable gurney. We also offer carbon gurneys of any size. Carbon gurneys will not bend, warp or kink like aluminum.
|
|
|
Coolbox The ultimate coolbox. There are 2 units available; a 12"x24" footprint and a 12"x15", both 10" high and made with carbon for durability, light weight, and the longest lasting effectiveness their sizes. The completely waterproof top seals will not leak. Both are available with or without a stainless steel cooling tube for chilled helmet air as well. The smaller coolbox is very effective for approximately 3 hrs during average race conditions. The larger box is very effective for approximately 10 hrs. Both coolboxes have been successfully used several seasons by winning Grand Am and ALMS teams at the Daytona 24 Hours and LeMans 24 Hours.
|
|
